See Quote
Additions
Notes
Addresses for Quote
| Order Total | $565.87 |
|---|---|
| Shipping | $565.87 |
| Grand Total | $565.87 |
| Percentage due immediately | 50% |
| Amount due on order | 0% |
| Amount due on shipment | 0% |
| Order Total | $565.87 |
|---|---|
| Shipping | $565.87 |
| Grand Total | $565.87 |
| Percentage due immediately | 100% |
| Amount due on order | 0% |
| Amount due on shipment | 0% |
Lag
Plate
Long Arm
No Shutter Dogs
None
No Hardware
No Hinges
No Slide Bolt
None
Copper
| Pair Width |
Pair Height |
Short Side |
Enter Quantity of pairs | |
|---|---|---|---|---|
| Pairs | ||||
|
Allowed Range is...
|
||||
| Add Another Size | + |
|||
| Add Another Type | + |
|||
| Once all quantities are entered, please click on the red arrow on your right for the final step! | ||||
| If you're looking for other design elements for our shutters such as an archtop, cutout, rabbetting or beading please inform your representative upon receiving your quote. |
Fleur De Lis
Moon
Anchor
No Mouse Holes
Mouse Holes
Solid Archtop
Full Archtop
Beaded
Rabbetted
Beaded Rabbet
In a beaded shutter, a bead is run down the full length of the outside edges of the stiles on the front.
A rabetted shutter has a 3/8" rabbet on the stiles where the shutters come together. The pair will overlap when closed.
If both are applied, the bead is applied on the opposite side from the rabbet. Only 1 bead will be visible in any position.
Inner stile beading is a visual detail that runs down the side of the stile that connects with the crossrails.
Arched tops replace the top rail of shutter with an alternative creating an arched top in a circular arc shape.
The exact shape is determined by the height and width of the shutter, plus the short side - the height of the outer stile where it intersects the arc.
False Tilt Rods are a visual detail, mimicking the look of a true tilt rod on our fixed louvered shutters.
Cutouts are laser-cut through the entire thickness of the upper-most panel on the shutter. They are typically 5-inches wide, though 2-inch wide cutouts are used on smaller shutters.
Z-bracing run diaganol from the corner of the top batten to the inside corner of the bottom batten.
It transfers force closer to the mounting hardware, and helps combat sagging of the shutters over time.
